Spice Rack Plan
A clean, three‑tier wall‑mounted spice rack sized for standard spice jars. Includes full cut list, step‑by‑step instructions, and mounting options.
- Skill Level: Beginner–Intermediate
- Build Time: 2–3 hours
- Material: 1×4 stock or similar
Project Specifications
- Overall Size: 16" tall × 12" wide × 3½" deep
- Capacity: 15–18 standard spice jars
- Joinery: Glue + brad nails or screws
- Mounting: Keyholes or French cleat
Cut List
All parts from 1×4 stock (approx. ¾" × 3½" actual) unless noted.
| Part | Qty | Dimensions | Notes |
|---|---|---|---|
| Back Panel | 1 | 16" × 12" | ½" ply or glue‑up |
| Side Rails | 2 | 16" × 3½" | Vertical sides |
| Shelves | 3 | 12" × 3½" | Spice shelves |
| Front Rails | 3 | 12" × 1" | Ripped from 1×4 |
| Mounting Strip | 1 | 12" × 1½" | Keyholes or cleat |
Step‑By‑Step Instructions
Step 1 — Prepare the Back Panel
Glue two 1×6 boards edge‑to‑edge to create a 12" wide panel. Clamp flat and allow to dry, then sand smooth. ½" plywood cut to 16" × 12" also works well.
Step 2 — Cut and Sand All Parts
Cut side rails, shelves, front rails, and mounting strip to final size. Lightly break edges and sand all parts to 120–220 grit.
Step 3 — Attach the Side Rails
Position side rails flush with the left and right edges of the back panel. Apply glue and secure from the back with brad nails or screws.
Step 4 — Install the Shelves
Mark shelf locations: 3" down from the top for the first shelf, then 6" between shelves. Glue shelf ends and fasten through the side rails.
Step 5 — Add the Front Rails
Rip 1" wide front rails and mount them about 1" above each shelf surface. Glue and pin nail into the side rails.
Step 6 — Mounting Strip & Hardware
Attach a mounting strip across the back near the top. Add either routed keyholes or a French cleat for secure wall mounting.
🛠️ Tools & Supplies Needed
These are the recommended tools and supplies for building this spice rack. You can use your own equipment or purchase through the links provided.
⚡ Power Tools
-
🪚 Miter Saw
Buy a miter saw -
🔫 Brad Nailer (18‑gauge)
Buy a brad nailer -
🔩 Drill / Driver
Buy a drill/driver
🔧 Hand Tools
-
🗜️ Clamps
Buy clamps -
📏 Measuring Tape & Square
Buy measuring tools
📦 Supplies
-
🧴 Wood Glue
Buy wood glue -
🪵 Sandpaper (120–220 grit)
Buy sandpaper -
🎨 Finishing Oil / Polyurethane
Buy wood finish
✨ Optional Add‑Ons
-
🔧 Keyhole Router Bit
Buy keyhole bit -
🪛 French Cleat Hardware
Buy French cleat hardware
Some links may be affiliate links. Purchasing through them helps support future woodworking plans.